Search

PAGES COPYRIGHT©2019 ZTWATER.COM    渝ICP备18012939号    POWERED BY 300.CN   【MANAGE

Thank you for visiting. If you have any intention of cooperation, Please leave a message for us or contact us in the following way. We will give you feedback in the first time and provide you with the most sincere service. Thank you.

 

TEL:(619)3835003
E_mail:zhengyanglu023@gmail.com
ADD:Hongqi River gully, Chongqing, China

HELLO!

MESSAGE

PRODUCTS

TELESCOPIC
DEVICE

Your location:
Home page
>
>
>
KYP-F-eccentric reducer rubber joint

KYP-F-eccentric reducer rubber joint

浏览量
所属分类
Connect
Describe
KYP-F eccentric reducer rubber joint
KYP-F eccentric reducer rubber joints are improved on the basis of KXT rubber joints, which can solve the problems of different calibers and different pipes in the connection of metal pipes. The eccentrically-restricted rubber joint has the function of shock absorption and noise reduction, which can save pipeline installation parts and save costs. It consists of an inner rubber layer, a fabric reinforcement layer, a middle rubber layer, an outer rubber layer, an end reinforcing metal ring or a wire ring, and then a metal flange connection. It has the characteristics of high pressure resistance, good elasticity, large displacement, balanced pipeline deviation, vibration and noise reduction, good noise reduction and convenient installation.
Eccentric reducer rubber joints can be widely used in water supply and drainage, circulating water, HVAC, fire protection, paper, pharmaceutical, petrochemical, ship, water pump, compressor, fan and other pipeline systems. General class: Suitable for conveying water with a temperature of -20~115 °C, an acid solution or an alkali solution with a concentration below 10%. There are also special rubber materials required for special pipes: such as oil, high temperature, ozone, abrasion or other forms of chemical corrosion.
 
[product alias]: reducer rubber joint, rubber soft joint
[product pressure]: 0.6MPa-1.0MPa
[product specifications]: [DN25mm-DN500mm]
[Product Certification]: ISO9001-2008
 
Features
1. Pipe-pump installation eccentric head: It is used to prevent cavitation, and the head of the pump inlet should generally be installed horizontally. This is to prevent the gas phase in the pipe from accumulating at the pump port, forming large bubbles into the pump cavity and damaging the pump. . Only one case can be installed on the bottom. That is the elbow that is directly bent upwards behind the head. In this case, it is impossible to accumulate in the gas phase.
 
2. Pump-pipe installation reducer: There is a difference between the pump outlet and the external pipe system. It is used for different diameter heads. It can realize the straight connection of two pipes of different sizes to realize the pipe fittings with reduced diameter.
 
The axial displacement of the eccentric reducer rubber joint is: the elongation or compression of the rubber joint in the direction of fluid flow (ie, the direction of the central axis).
 
The lateral displacement of the eccentric reducer rubber joint is: the displacement of the rubber joint in a direction perpendicular to the direction of the fluid, that is, the direction of the central axis.
 
The angular displacement of the eccentric reducer rubber joint is the sum of the angle between the vertical center line of the two end faces of the rubber joint and the original central axis.
 
Technical Parameters
序号 No. 部位 Part 材料 Material
1 主体 Body 天然橡胶(NR)、氯丁橡胶(CR)、丁基橡胶(IIR)、丁腈橡胶(NBR)、氟橡胶(FKM)、三元乙丙橡胶(EPDM)
2 内、外衬 Inner & Outer Rubber 天然橡胶(NR) 氯丁橡胶(CR)丁基橡胶(IIR) 丁腈橡胶(NBR)氟橡胶(FKM)三元乙丙橡胶(EPDM)聚四氟乙烯(PTFE)
3 主体骨架 Body Carcass 尼龙帘布 Nylon cord fabric
4 增压环 Reinforcing Ring 多股镀铜钢丝 Multi-strand coppering steel wire
5 法兰 Flange 铸造、锻造碳钢 Cast and forged carbon steel(Q235)、不锈钢 Stainless steel(201、304、316、321)、塑料 Plastic(CPVC、PVDF、PPH、UPVC、RPP)
项目Item |型号Medol KYP-F(DN25~300) KYP-F(DN350~500) A、如介质油,酸碱物质
B、工作温度有特殊要求
C、也可来函来图定制
D、订货时需说明
A. If media is oil, acid or alkali.
B. If special requirements for working temperature
C. If OEM orders with drawings or samples
D. Please Inform us about above when ordering
工作压力
MpaWoring pressure
1.0 0.6
爆破压力
Mpa Burst Pressure
1.8 1.5
真空度 Kpa Vacuum 86.7 53.3
适用温度°
Applicable Temperature
-20℃~+115℃(特殊可达-30℃~+250℃)-20℃~+115℃(-30℃~+250℃ under special conditions)
适用介质
Applicable Medium
空气、压缩空气、水、海水、热水、油、酸、碱等Air, compressed air, water, sea water, oil, acid, alkali, etc.
注:主要零件材料同KXT型 Note: the materials of main parts are the same with those of KXT type
公称通径DN
Nominal Diameter
(mm)
长度
LengthL(mm)
轴向位移
Axial displacement (mm)
横向位移
Haorizontal isplacement(mm)
偏转角度
Angular deflection(a1+a2)°

伸长Extension

压缩;Compression

50×40 180 20 30 45 35
65×40 180 20 30 45 35
65×50 180 20 30 45 35
80×50 180 20 30 45 35
80×65 180 20 30 45 35
100×50 180 20 30 45 35
100×65 180 20 30 45 35
100×80 180 20 30 45 35
125×65 180 20 30 45 35
125×80 180 20 30 45 35
125×100 180 22 30 40 35
150×80 200 22 30 40 35
150×100 200 20 30 45 35
150×125 200 22 30 40 35
200×100 220 22 30 40 35
200×125 220 22 35 40 30
200×150 220 25 30 40 35
250×100 220 22 35 40 30
250×125 220 25 35 40 30
250×150 220 25 35 40 30
250×200 220 25 35 40 30
300×150 220 25 35 40 30
300×200 220 25 35 40 30
300×250 220 25 35 40 30
350×200 230 28 38 40 26
350×250 230 28 38 35 26
350×300 230 28 38 35 26
400×200 240 28 38 35 26
400×250 240 28 38 35 26
400×300 240 28 38 35 26
注:1、特殊要求可按用户图纸制作,法兰标准采用GB/T9115.1-2000,可选配(GB、JB、HG、CB、ANSI、DIN、BSEN、NF、EN、JIS、 ISO等)法兰标准生产。橡胶球体可做天然橡胶、三元乙丙橡胶、氯丁橡胶、丁基橡胶、丁腈橡胶、氟橡胶等。
2、悬空给水使用DN200以上产品,管道必须有固定支撑或固定托架,否则产品应安装防拉脱装置。
3、用户使用橡胶接头,对应法兰应是阀门法兰或符合GB/T9115.1-2000法兰。
Notes:1. For OEM orders with special requirement, rubber joints can be made according to customers' drawings. Generally, flange standard is GB/T9115.1-2000, other GB, JB, HG, CB, ANSI, DIN, BSEN, NF, EN, JIS, ISO flanges are also available upon request. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc.
2.When rubber joints size above DN200 are used for overhead water supply system, the pipes must be equipped with fixed supports or fixed brackets, otherwise control units shall be installed on rubber joints.
3.Matching flanges of rubber joints shall be valve flanges or GB/T9115.1-2000 flanges.