Search

PAGES COPYRIGHT©2019 ZTWATER.COM    渝ICP备18012939号    POWERED BY 300.CN   【MANAGE

Thank you for visiting. If you have any intention of cooperation, Please leave a message for us or contact us in the following way. We will give you feedback in the first time and provide you with the most sincere service. Thank you.

 

TEL:(619)3835003
E_mail:zhengyanglu023@gmail.com
ADD:Hongqi River gully, Chongqing, China

HELLO!

MESSAGE

PRODUCTS

TELESCOPIC
DEVICE

Your location:
Home page
>
>
>
KKT-clamp rubber joint

KKT-clamp rubber joint

浏览量
所属分类
Connect
Describe
KKT clamp rubber joint
The clamp type rubber joint adopts a clamp instead of the flange and the bolt. When used, the two ends of the clamp type rubber joint can be conveniently placed on the pipe to be connected, and the rubber joint is fixedly connected with the pipe through the stainless steel clamp. ; Release the clamp when removing. The clamp type rubber joint reduces vibration, reduces noise, has good flexibility, and is easy to use. The internal density is high and the elastic deformation effect is good.
The clamp type rubber joint is composed of a fabric-reinforced rubber member and a clamp fastener, and is used for a joint for damping, noise reduction and displacement compensation of the pipeline. It is a pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. According to the working pressure: 0.1MPa, 0.6MPa two grades.
 
[product alias]: Clamp type flexible rubber joint
[product pressure]: 0.1MPa-0.6MPa
[product specifications]: [DN32mm-DN2000mm]
[Product Certification]: ISO9001-2008
[Scope of application]: [acid, alkali, corrosion, oil, hot water, cold water, compressed air, compressed natural gas, etc.]
[Working temperature]: -40 degrees to 80 degrees (can also process high temperature rubber joints)
 
Features
The clamp rubber joint is convenient to install, low in cost and convenient in maintenance. Reduce vibration, reduce noise, good flexibility and easy to use. The internal density is high and the elastic deformation effect is good. The clamp type rubber joint is composed of a fabric-reinforced rubber member and a clamp fastener, and is used for a joint for vibration isolation, noise reduction and displacement compensation. It is a pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. According to the working pressure: 0.1MPa, 0.6MPa two grades. Product use: It is suitable for connection with pumps and valves, especially for pipes with large vibration and frequent changes in heat and cold. Applicable medium: seawater, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, fuel oil, lubricating oil, refined oil, air, gas, steam and granular powder. The product range includes oil resistant rubber joints, high temperature resistant rubber joints, acid and alkali resistant rubber joints, wear resistant rubber joints, seawater resistant rubber joints, corrosion resistant rubber joints, internal oil resistant, external high temperature resistant rubber joints, and negative pressure rubber joints. The clamp type rubber joint reduces vibration, reduces noise, has good flexibility, and is easy to use. The internal density is high and the elastic deformation effect is good.
 
The clamp type rubber joint is composed of a fabric-reinforced rubber member and a clamp fastener, and is used for a joint for vibration isolation, noise reduction and displacement compensation. It is a pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. Thereby, the purpose of compensating the displacement of the pipeline due to thermal expansion and contraction and water delivery is achieved. Compared with general rubber joints, it has the following characteristics:
Clamp-on rubber joints save flanges and bolts, saving engineering costs.
Crimping rubber joints do not require flanges at the nozzles, increasing productivity.
Clamp-type rubber joints simplify installation and maintenance and increase work efficiency.
The clamp type is made of stainless steel and has corrosion resistance. The installation length is designed according to JGD (KXT)-Df or according to the needs of customers.
 
Technical Parameters
 
 No.  Part  Material
1  Body (NR)、(CR)、(IIR)、(NBR)、(FKM)、(EPDM)
2  Inner & Outer Rubber (NR) (CR)(IIR) (NBR)(FKM)(EPDM)(PTFE)
3  Body Carcass  Nylon cord fabric
4 Reinforcing Ring  Multi-strand coppering steel wire
5  clamp Cast and forged carbon steel(Q235)、 Stainless steel(201、304、316、321)
Item |Medol KKT-1 KKT-2
A. If media is oil, acid or alkali. 
B. If special requirements for working temperature 
C. If OEM orders with drawings or samples 
D. Please Inform us about above when ordering
MpaWorking pressure 0.1(1) 0.6(6)
℃Applicable Temperature --20℃~+115℃(-30℃~+250℃ under special conditions)
Applicable Medium Air, compressed air, water, sea water, oil, acid, alkali, etc.
 Note: the materials of main parts are the same with those of KXT type
DN
Nominal Diameter
(mm)

LengthLmm

Axial displacement mm

Haorizontal isplacement mm

Angular deflection(a1+a2)°
mm

inch

Extension Compression
32 1.25 180 7 10 10 15
40 1.5 180 7 13 11 15
50 2 180 8 15 12 15
65 2.5 180 10 19 13 15
80 3 180 12 19 13 15
100 4 180 12 20 14 15
125 5 200 16 25 22 15
150 6 200 16 25 22 15
200 8 200 16 25 22 15
250 10 200 16 25 22 15
300 12 200 16 25 22 15
350 14 200 16 25 22 15
400 16 200 16 25 22 15
450 18 200 16 25 22 10
500 20 200 16 25 22 10
600 24 200 16 25 22 10
700 28 200 16 25 22 10
800 32 260-350 18 25 22 10
900 36 260-550 18 25 24 10
1000 40 260-350 18 25 24 10
1200 48 260-550 18 25 24 10
1400 56 260-550 20 26 26 10
1600 64 260-550 20 26 26 10
1800 72 260-550 20 26 26 10
2000 80 260-550 20 26 26 10

Notes: 1. For OEM orders with special requirement, rubber joints can be made according to customers' drawings. Material of rubber body can be NR natural rubber, EPDM, Neoprene, IIR butyl rubber, NBR Buna-N, FKM, etc.