Search

PAGES COPYRIGHT©2019 ZTWATER.COM    渝ICP备18012939号    POWERED BY 300.CN   【MANAGE

Thank you for visiting. If you have any intention of cooperation, Please leave a message for us or contact us in the following way. We will give you feedback in the first time and provide you with the most sincere service. Thank you.

 

TEL:(619)3835003
E_mail:zhengyanglu023@gmail.com
ADD:Hongqi River gully, Chongqing, China

HELLO!

MESSAGE

PRODUCTS

TELESCOPIC
DEVICE

Your location:
Home page
>
>
>
MR type rubber shock absorber

MR type rubber shock absorber

浏览量
所属分类
Shock Absorber
Describe
MR type rubber shock absorber
The MR rubber shock absorber is designed with low frequency value and is spray-coated for good weather resistance and good shock resistance. The base is made of nitrile rubber for extended life. Simple installation, MR rubber shock absorber can be applied to all kinds of mechanical equipment, and the shock absorption performance is good. Especially suitable for windmills, vibration machines, HVAC equipment, electronic equipment, control panels, air compression, mechanical equipment and other installation environments.
 
[Product Certification]: ISO 9001-2008
[Scope of application]: construction, water supply and drainage, light and heavy industry, refrigeration, sanitation, plumbing, fire protection, electricity
[Vibration level]: Class A
 
Features
Before loading, please confirm that the model specifications of the shock absorber are correct. Tools required for installation instructions: metric caliber open end wrench, level ruler, claw jack.
1. Remove all grease and debris from the floor.
2. Move the machine to position and raise it to the height that can be placed in the shock absorber.
3. Remove the adjusting bolt on the shock absorber and lock the washer and nut into the adjusting bolt.
4. Position the shock absorber and lock the adjustment bolt through the machine's foot hole into the shock absorber.
5. Adjust each bolt so that the bottom of the shock absorber housing is about 5mm from the ground.
6. Lower the equipment so that each shock absorber can withstand the load.
7. Lock nuts and washers to secure the device and shock absorber.
8. Re-check the height of the shock absorber after 2 to 24 hours of installation to ensure that the enclosure does not come into contact with the ground.
 
Technical Parameters
 

model

Size (mm)

Load (Kgs)

D

H

HL

AB

Min

Max

MR-80-H

80

33

136

M12

200

500

MR-120-H

120

40

139

M16

500

1500

MR-160-H

160

48

147

M22

1500

2800

MR-200-H

200

60

225

M30

2800

4000