Search

PAGES COPYRIGHT©2019 ZTWATER.COM    渝ICP备18012939号    POWERED BY 300.CN   【MANAGE

Thank you for visiting. If you have any intention of cooperation, Please leave a message for us or contact us in the following way. We will give you feedback in the first time and provide you with the most sincere service. Thank you.

 

TEL:(619)3835003
E_mail:zhengyanglu023@gmail.com
ADD:Hongqi River gully, Chongqing, China

HELLO!

MESSAGE

PRODUCTS

ACTIVATED
CARBON

Your location:
Home page
>
>
>
Shell activated carbon

Shell activated carbon

浏览量
所属分类
Activated Carbon
Describe
Shell activated carbon
This product is made of high-quality fruit shell and refined by advanced technology. It has developed pore structure, large specific surface area, strong adsorption capacity, high mechanical strength, small bed resistance, stable chemical properties, easy regeneration and durability. It is widely used for deep purification of drinking water, industrial water and wastewater, separation, purification and purification of various gases; recovery of organic solvents; decolorization and deodorization of sugar, monosodium glutamate, medicine, sprinkling, and beverages.
 
Common specifications of shell activated carbon: 0.5mm-1.0mm 1.0mm-2.0mm 2.0mm-4.0mm 4.0mm-6.0mm 6.0mm-8mm
 
Main technical parameters of fruit shell granular activated carbon
 
Iodine valuemg/g
≥1000
strength%
≥90
Specific surface aream2/g
900-1100
Moisture%
≤5
Filling densityg/cm3
0.45-0.55
Benzene adsorption
≥45mg/g
 
Precautions:
    1. During the transportation process, the activated carbon should be prevented from being mixed with hard materials. It is not allowed to step on or step on to prevent the carbon particles from breaking and affecting the quality.
    2. Storage should be stored in porous adsorbent, so water immersion should be absolutely prevented during transportation, storage and use. After water immersion, a large amount of water is filled with active voids, making it useless.
    3, to prevent tar substances in the use process, should prohibit the tar substances into the activated carbon bed, so as not to block the activated carbon gap, so that it loses its adsorption. It is best to have a decoking device to purify the gas.
    4. When the fire-activated activated carbon is stored or transported, it should be prevented from direct contact with the fire source to prevent oxygen from entering the fire and regeneration when the activated carbon is regenerated. The steam must be cooled to below 80 °C after regeneration. Otherwise, the temperature is high and oxygen is encountered. Activated carbon spontaneous combustion.